Ford Electric Ranger 2001 Manual page 811

418-00-3
DESCRIPTION AND OPERATION (Continued)
The CTM is mounted to the instrument panel
behind the radio. The CTM controls essential and
convenience features, such as windshield wipers,
chime functions, and door ajar indication. Refer to
Section 419-10 of the Ranger Workshop Manual .
DIAGNOSIS AND TESTING
Communications Network
Electrical Schematic
Refer to Electrical and Vacuum Troubleshooting
Manual, Cell 14, Multiplex Communication
Network for schematic and connector information.
System Precheck
PINPOINT TEST PC: DATA LINK DIAGNOSTICS NETWORK TEST
PC1 DATA LINK DIAGNOSTICS NETWORK TEST
• Run the DATA LINK DIAGNOSTICS Network Test.
• Is SYSTEM PASSED obtained?
Module Communications Network
TEST STEP
The ECS module is located behind the instrument
panel next to the plenum assembly. The module
controls the air bag deployment in a crash situation.
Refer to Section 418-00 and Section 501-20 of the
Ranger Workshop Manua.
Inspection and Verification
Refer to Section 100-07.
ACTION TO TAKE
Yes =
No =
418-00-3
Test PASSED.
If no response from NGS,
GO to Pinpoint Test G.
If CKT70, CKT914, and/or
CKT915 = SOME
MODULES NOT
RESP/NOT EQUIP, REFER
to Symptom Chart.
If CKT70 = ALL
MODULES NO RESP/NOT
EQUIP, GO to Pinpoint Test
E.
If CKT914 = ALL
MODULES NO RESP/NOT
EQUIP, GO to Pinpoint Test
F.
If CKT915 = ALL
MODULES NO RESP/NOT
EQUIP, GO to Pinpoint Test
F.
If module in question is NO
RESPONSE/NOT
EQUIPPED, REFER to
Symptom Chart.
If module in question is NO
RESPONSE ON CKT914
(BUS+), REFER to
Symptom Chart.
If module in question is NO
RESPONSE ON CKT915
(BUS-), REFER to
Symptom Chart.
2001 Ranger EV, 01/2001