414-03A-152
DISASSEMBLY AND ASSEMBLY (Continued)
High Voltage/Traction Battery
16.
voltage jumper (HVJ) ends to contact one
another. The ends of the HVJs must be
wrapped with orange electrical tape to
prevent them from contacting one another.
Disconnect the HVJs from the contactor box,
one at a time.
•
•
•
17. Disconnect the contactor box harness.
1 Disconnect the harness.
2 Remove the bracket bolt.
18. Remove the fuse nut.
19. Remove the four high-voltage traction battery
two-pin connector retaining nuts.
CAUTION: Do not allow the high
Use the Battery Terminal Cap Opener to
open the battery module caps.
Remove the two bolts.
Wrap the HVJs with orange electrical tape
to prevent contact.
2001 Ranger EV, 01/2001
414-03A-152