Ford Electric Ranger 2001 Manual page 793

414-03B-190
DISASSEMBLY AND ASSEMBLY (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
11. NOTE: The module orientation must be correct
or the HVJs will not fit.
Install the modules into the traction battery
case. Match the numbers of the modules to the
numbers in the bottom of the traction battery
case.
12. NOTE: Install the ''P'' clip in the same
position that was noted during disassembly.
Position the recirculating blower and install the
nuts.
13. Install the blower cover and battery hold
downs.
1 Install the cover.
2 Install the hold down.
3 Install the hold down.
14. Install the battery hold down.
414-03B-190
2001 Ranger EV, 01/2001