Ford Electric Ranger 2001 Manual page 588

414-03A-185
DISASSEMBLY AND ASSEMBLY (Continued)
High Voltage/Traction Battery
49. Probe the contactor box HVJs to verify correct
traction battery voltage. The voltage should be
approximately 323 volts DC.
50. Wrap the contactor box HVJs with orange
electrical tape to prevent contact or shorting.
51. NOTE: The HVJ wiring that runs between the
battery modules must fit into the separators.
Install the front battery module separator plates.
52. Install the rear battery module separator plates.
53. NOTE: The contactor box is held in position
with strips of Velcro
Install the contactor box in the rear RH side of
the traction battery.
414-03A-185
.
TM
2001 Ranger EV, 01/2001