Ford Electric Ranger 2001 Manual page 722

414-03B-119
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
11. NOTE: The lift table operates using a minimum
of 80 psi and a maximum of 120 psi of
compressed air.
Slowly raise the lift table until it contacts the
bottom of the battery pack.
Push the lever up.
•
CAUTION: Do not adjust either
12.
regulator for more than 60 psi.
NOTE: The lift table is designed to only lift
the battery pack assembly. It will not lift the
entire vehicle.
Continue to lift the battery pack until the lift
table system pressure equalizes and both gauges
reach 60 psi.
13. NOTE: There are three mounting bolts on both
the left and right sides of the traction battery.
Remove the six mounting bolts from the battery
pack.
14. Lower the lift table slowly until it rests on the
pallet stops and system pressure is completely
released (0 psi).
15. Raise the vehicle.
414-03B-119
2001 Ranger EV, 01/2001