414-03B-205
DISASSEMBLY AND ASSEMBLY (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
62. Remove the orange electrical tape from the
HVJ ends.
63. NOTE: The HVJ from module 25 connects to
the ''+'' terminal on the contactor box, the HVJ
from module 1 connects to the ''-'' terminal on
the contactor box.
Connect the HVJ ends to the contactor box and
install the nuts.
Fill the area around the nuts with Nyogel.
•
64. Install the traction battery cover.
Install the 22 bolts.
•
Apply Locktite 242 (Threadlock and Sealer)
•
to the bolts prior to installation.
65. Install the traction battery. Refer to
Battery.
414-03B-205
Traction
2001 Ranger EV, 01/2001