414-03B-116
REMOVAL AND INSTALLATION (Continued)
Traction Battery
High Voltage/Traction Battery — Nickel Metal Hydride
7. Remove the HVJ.
Use the Battery Terminal Cap Opener to
•
open the battery module caps.
Remove and discard the two nuts.
•
Installation
1. To install, reverse the removal procedure.
Refill the HVJ caps with Nyogel after
•
tightening the nuts.
Apply Locktite 242 to the 22 traction
•
battery cover bolts.
Removal
1. Disconnect the traction battery auxiliary load
high-voltage connector. Refer to
100-05.
414-03B-116
Section
2001 Ranger EV, 01/2001