Ford Electric Ranger 2001 Manual page 599

414-03A-196
DISASSEMBLY AND ASSEMBLY (Continued)
High Voltage/Traction Battery
82. Connect the two heating element connectors to
the harness and clip them into the separator
plate.
83. Connect the heating element connector to the
harness.
84. Position the heater harness down the center of
the battery around the LH front battery
modules.
85. Install two clips into the LH front separator
plate.
•
Place a zip tie through each of the clips.
2001 Ranger EV, 01/2001
414-03A-196