414-03B-154
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
3. Unclip the battery hold down tie bar cover.
1 Unclip and disconnect the sensor lead
electrical connector.
2 Unclip the relay.
3 Unclip the cover.
4. Remove the battery hold down strap bolt and
pull the straps back off the battery hold down
tie bar.
5. Remove the battery hold down tie bar.
Modules 13,14
6. Disconnect the 14+ and 13- HVJs.
Disconnect the HVJ cables and discard the
•
nuts.
414-03B-154
2001 Ranger EV, 01/2001