Ford Electric Ranger 2001 Manual page 515

414-03A-112
REMOVAL AND INSTALLATION (Continued)
High Voltage Wiring — Sensory Lead Harness (10B694)
High Voltage/Traction Battery
4. NOTE: The HVPDB power supply cable is
held in position with three clips.
Remove the HVPDB.
1 Remove the bolts.
2 Remove the HVPDB.
Installation
1. To install, reverse the removal procedure.
Removal
1. Remove the traction battery. Refer to
Battery.
2. Remove the traction battery cover.
1 Remove the 22 bolts.
2 Remove the cover.
414-03A-112
Traction
2001 Ranger EV, 01/2001