Ford Electric Ranger 2001 Manual page 17

100-05-3
GENERAL PROCEDURES (Continued)
Traction Battery Charging
Standard Service Procedures
3. NOTE: For Postal Ranger EV.
Position four orange cones around the corners
of the vehicle to mark off a one meter (three
feet) perimeter around the vehicle.
4. Do not allow any unauthorized personnel into
the buffer zone during repairs involving
high-voltage. Only personnel trained for service
on the high voltage systems of the EV are to be
permitted in the buffer zone.
1. Pull the vehicle up to a power control station
(PCS).
2. Place the gear selector in the park (P) position
and remove the key from the ignition.
3. NOTE: For Electric Ranger.
Open the charger inlet access door.
100-05-3
2001 Ranger EV, 01/2001