Ford Electric Ranger 2001 Manual page 737

414-03B-134
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
3. Remove the traction battery cover.
1 Remove the 22 bolts.
2 Remove the cover.
4. NOTE: There are two thermistors (temperature
sensors) located on modules 3, 12, and 18.
There is also one mounted in the cover of the
recirculating blower.
NOTE: The traction battery module procedure
found in the General Procedures section does
not have to be followed for thermistor removal
and installation.
To remove a thermistor for a module, remove
the module. Refer to the appropriate module
removal and installation procedure.
5. Remove the module cover.
6. Remove the thermistor.
1 Remove the clips.
2 Remove the thermistor.
414-03B-134
2001 Ranger EV, 01/2001