Ford Electric Ranger 2001 Manual page 236

303-03-15
REMOVAL AND INSTALLATION (Continued)
Coolant Pump —Postal Ranger EV
Engine Cooling
7. Disconnect the coolant pump electrical
connector.
8. Remove the coolant pump.
1 Remove the bolt.
2 Remove the pump.
Installation
1. To install, reverse the removal procedure.
After installation, bleed the cooling system.
•
Refer to
Bleed
Removal
1. If connected, disconnect the vehicle from the
charging station.
2. Disconnect the auxiliary battery ground cable.
Cooling System Drain, Fill and
2001 Ranger EV, 01/2001
303-03-15