414-03B-87
GENERAL PROCEDURES (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
28. Disconnect the Traction Battery Low-Voltage
Service Cord from the 76-pin low-voltage
connector on the vehicle.
29. Apply Locktite 242 (threadlock and sealer) to
the 22 traction battery cover bolts.
30. Install the traction battery cover.
Install the 22 bolts.
•
31. Remove the Traction Battery High-Voltage
Lockout and Diagnostic Tool.
32. Install the traction battery. Refer to
Battery.
414-03B-87
Traction
2001 Ranger EV, 01/2001