Ford Electric Ranger 2001 Manual page 723

414-03B-120
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
16. Release the lift table brake, disconnect the air
hose, and roll the lift table from under the
vehicle.
Installation
1. Raise and support the vehicle. Refer to
100-02.
2. Position the lift table and battery pack under the
vehicle.
Connect the lift table to the shop air supply.
•
3. With the assistance of a second person,
carefully lower the vehicle down to within ten
inches (25.4 cm) of the battery pack.
4. CAUTION: Make sure the vehicle and
battery pack are aligned during battery pack
installation.
Lift the battery pack up into the mounting
position.
414-03B-120
Section
2001 Ranger EV, 01/2001