204-02-26
REMOVAL AND INSTALLATION (Continued)
Rear Suspension
2. Install the wheel bearing using the Wheel
Bearing Removal and Installation Kit or
equivalent.
3. Install the snap ring.
4. Install the halfshaft. Refer to
5. Install the hub.
1 Position the hub.
2 Install the hub washer and nut. Tighten the
nut to the specified torque to install the hub
into the bearing and over the halfshaft.
6. Install the rotor.
1 Position the rotor.
2 Install the retaining clips.
204-02-26
Section
205-05.
2001 Ranger EV, 01/2001