Ford Electric Ranger 2001 Manual page 600

414-03A-197
DISASSEMBLY AND ASSEMBLY (Continued)
High Voltage/Traction Battery
86. Position the heater harness and low-voltage
harness across the separator plate and zip tie
them into place.
87. NOTE: The battery module is held into place
with strips of Velcro
Install the BCM.
1 Position the BCM.
2 Connect the two upper high-voltage
3 Connect the two lower low-voltage
88. Clip the heating element connector into the
low-voltage harness.
TM .
connectors.
connectors.
2001 Ranger EV, 01/2001
414-03A-197