414-03B-150
REMOVAL AND INSTALLATION (Continued)
High Voltage/Traction Battery — Nickel Metal Hydride
3. Unclip the battery hold down tie bar cover.
1 Unclip and disconnect the sensor lead
electrical connectors.
2 Unclip the cover.
4. Unclip the battery hold down tie bar cover.
1 Unclip and disconnect the sensor lead
electrical connector.
2 Unclip the relay.
3 Unclip the cover.
5. Remove the battery hold down strap bolt and
pull the straps back off the battery hold down
tie bar.
6. Remove the battery hold down tie bar.
414-03B-150
2001 Ranger EV, 01/2001