211-02-11
REMOVAL AND INSTALLATION (Continued)
Power Steering
2. NOTE: The A/C system is not evacuated for
this procedure.
Remove the two front A/C compressor bolts.
3. NOTE: The traction battery has been removed
for clarity.
Remove the two rear A/C compressor bolts.
CAUTION: Do not force the
4.
compressor into position, or damage to the
A/C lines may result.
Raise and support the compressor using a 9.5
mm (3/8 in) diameter, 900 mm (36 in) long
rod.
Lift the compressor high enough to slide the
•
rod over the vehicle frame and under the
compressor.
5. Remove the front section of the A/C
compressor bracket.
1 Remove the two bolts.
2 Remove the two bolts.
3 Remove the bracket.
211-02-11
2001 Ranger EV, 01/2001