Ford Electric Ranger 2001 Manual page 545

414-03A-142
REMOVAL AND INSTALLATION (Continued)
Traction Battery Temperature Sensor — Modules 22-24
High Voltage/Traction Battery
3. Fill the area around the high-voltage jumper
nuts with Nyogel.
4. Install the BCM. Refer to
Module
Removal
1. The #1 temperature sensor is located on the
negative side of the #17 traction battery
module. To remove the temperature sensor,
remove traction battery module #17. Refer to
Traction Battery Module — Modules17-18.
2. The #2 temperature sensor is located on the
negative side of the #6 traction battery module.
To remove the temperature sensor, remove
traction battery module #6. Refer to Traction
Battery Module — Modules17-18.
3. The #3 temperature sensor is located on the
positive side of the #26 traction battery module.
To remove the temperature sensor, remove
traction battery module #26. Refer to Traction
Battery Module — Modules 16, 25-27.
4. The #4 temperature sensor is located on the
positive side of the #31 traction battery module.
To remove the temperature sensor, remove
traction battery module #31. Refer to Traction
Battery Module — Modules 12-15, 28-31.
Battery Control
(BCM).
2001 Ranger EV, 01/2001
414-03A-142