Table of Contents
Advertisement
Maintenance Manual
3. PERIODICAL MAINTENANCE MEASURES
WARNING!
This chapter details the perioical maintenance measures for the SSS1100 / 1100+
and SSS2.
3.1.
Cabinet maintenance
3.1.1.
Cleaning the SSS1100 / 1100+ and SSS2
WARNING!
Keep the SSS1100 / 1100+ and SSS2 clean; dust may affect the cabinet ventilation.
Vacuum or wipe the outside of the cabinets wherever dust has collected on the
surfaces.
After cleaning the exterior of the cabinets tick off the box in the checklist.
!
Cabinet exterior cleaned
3.1.2.
Access to the plinth base
The grid panel on the plinth lower edge may be removable, by unscrewing the ten
M6 bolts which secure it to the plinth, as shown in Figure 1.
The cabinet anchor bolts can be tightened via the access provided by the removal of
the grids. The access also enables the cleaning of the plinth base.
Page
8 (27)
Exercise great caution when maintaining the SSS1100 / 1100+
and SSS2. Refer to [3].
Turn the mains site power switch off before cleaning the
SSS1100 / 1100+ and SSS2.
©
1999 Nokia Telecommunications Oy
¨ yes or ¨ no.
Document Number/Version
NTC DN9986052/1.0.0
Advertisement
Table of Contents
