Parameters - Mitsubishi Electric MELSERVO-J3W Series Instruction Manual

13. USING A LINEAR SERVO MOTOR

13.6 Parameters

CAUTION
In this servo amplifier, the parameters are classified into the following groups on a function basis.
Parameter group
Basic setting parameters
(No.PA )
Gain/filter parameters
(No.PB )
Extension setting parameters
(No.PC )
I/O setting parameters
(No.PD )
Special setting parameters
(No.PS )
Option setting parameter
(No.Po )
Never adjust or change the parameter values extremely as it will make operation
instable.
When the fixed values are indicated for any digits of a parameter, never change the
values of the digits.
When using this servo amplifier in the position control mode.
Use these parameters when making gain adjustment manually.
When changing settings such as analog monitor output signal, use these parameters.
Use these parameters when changing the I/O signals of the servo amplifier.
Use these parameters when setting specially for the linear servo motor.
These parameters are dedicated to MR-J3W.
Main description
13 - 36