Mitsubishi Electric MELSERVO-J3W Series Instruction Manual page 303

13. USING A LINEAR SERVO MOTOR
(2) List of details
No. Symbol
PS01 **LIT1 Linear function selection 1
The magnetic pole detection setting, the stop interval setting at home position
return, the valid/invalid setting of the linear servo motor thermistor can be
selected. (Refer to section 13.5.2.)
PS02 **LIM Linear encoder resolution setting Numerator
Set the linear encoder resolution in 1 m unit. (Refer to section 13.5.1 (4).)
Set the numerator for parameter No.PS02.
Linear encoder resolution ( m) LIM/LID
When "0" is set in this parameter, the factory setting is applied in the servo
amplifier.
PS03 **LID Linear encoder resolution setting Denominator
Set the denominator for parameter No.PS03.
When "0" is set in this parameter, the factory setting is applied in the servo
amplifier.
Name
0
Linear servo motor magnetic pole detection setting
0: Magnetic pole detection invalid (This setting is valid only
with absolute position Iinear encoder.)
1: Magnetic pole always valid
Stop interval setting at home position return
The stop interval for the dog method home position return is
set.
Stop interval
Setting
[pulse]
value
0 8192
1 131072
2 262144
3 1048576
4 4194304
5 16777216
6 67108864
Linear servo motor thermistor valid/invalid setting
0: Valid
1: Invalid
When the linear servo motor without thermistor is used, this
setting is invalid.
13 - 54
Factory Setting
Setting Unit
setting
Each 0301h Refer to
axis
function
column.
Each 1000
axis
Each 1000
axis
range
name
and
0
to
65535
0
to
65535