Mitsubishi Electric MELSERVO-J3W Series Instruction Manual page 247

General-purpose ac servo, sscnet interface 2-axis ac servo amplifier
Hide thumbs Also See for MELSERVO-J3W Series:
Table of Contents

Advertisement

12. ABSOLUTE POSITION DETECTION SYSTEM
(2) Installation of MR-BAT
Battery holder 1
CON1
Duct
Bring out the lead wire from the space between the ribs, and bend it as
shown above to store it in the duct. Connect the lead wire to the
connector. Be careful not to get the lead wire caught in the case or
other parts.
Securely insert MR-BAT to the battery holder 1.
Push the MR-BAT connector into CON1.
Confirm the click sound at this point.
The connector has to be connected in the right direction.
If the connector is pushed forcefully in the wrong direction,
the connector will break.
Place the MR-BAT lead wire to the duct designed to store
lead wires.
Install other seven MR-BATs in the same manner.
12 - 6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents