Mitsubishi Electric MELSERVO-J3W Series Instruction Manual page 366

14. USING A DIRECT DRIVE MOTOR
No. Symbol
PB33 VRF1B Gain changing vibration suppression control vibration frequency setting
PB34 VRF2B Gain changing vibration suppression control resonance frequency
setting
PB35 This parameter is not used. Do not change this value by any means.
PB36
PB37
PB38
PB39
PB40
PB41
PB42
PB43
PB44
PB45
Note 1. Each: Set parameters for each axis of A and B.
Common: Set parameters for common axis of A and B. Be sure to set the same value to the both axes. When the setting values are
different, the value set at last will be enabled.
2. The values are common in A-axis and B-axis.
Name
14 - 33
Each/ Default
common value Unit
(Note 1) (Note 2)
Each 100.0 Hz
Each 100.0 Hz
0.00
0.00
100
0.0
0.0
0.0
1125
1125
0004h
0.0
0000h
Reference
Section
5.5.2