Mitsubishi Electric MELSERVO-J3W Series Instruction Manual page 9

COMPLIANCE WITH CE MARKING
Refer to Appendix 3 for the compliance with CE marking.
COMPLIANCE WITH UL/CSA STANDARD
Refer to Appendix 4 for the compliance with UL/CSA standard.
<<About the manuals>>
This Instruction Manual and the following Servo Amplifier/Servo Motor Instruction Manuals (Vol.2) are
required if you use the General-Purpose AC servo MR-J3W- B for the first time. Always purchase them and
use the MR-J3W- B safely.
Refer to chapter 15 for using MR-J3W-0303BN6.
Relevant manuals
MELSERVO-J3W Series Instructions and Cautions for Safe Use of AC Servos
MELSERVO Servo Motor Instruction Manual (Vol.2)(Note 1)
EMC Installation Guidelines
SSCNET III Interface Linear Servo MR-J3- B-RJ004 INSTRUCTION MANUAL (Note 2)
SSCNET III Interface Direct drive servo MR-J3- B-RJ004 INSTRUCTION MANUAL (Note 3)
Note 1. Required to use the rotary servo motor.
2. Required to use the linear servo motor.
3. Required to use the direct drive motor.
<<Wiring>>
Wires mentioned in this instruction manual are selected based on the ambient temperature of 40
Manual name
A - 8
Manual No.
IB(NA)0300148
SH(NA)030041
IB(NA)67310
SH(NA)030054
In production
(104 ).