Mitsubishi Electric MELSERVO-J3W Series Instruction Manual page 367

14. USING A DIRECT DRIVE MOTOR
14.5.4 Extension setting parameters (No.PC
No. Symbol
PC01 ERZ Error excessive alarm level
PC02 MBR Electromagnetic brake sequence output
PC03 *ENRS Encoder output pulse selection
PC04 **COP1 Function selection C-1
PC05 **COP2 Function selection C-2
PC06 *COP3 Function selection C-3
PC07 ZSP Zero speed
PC08 This parameter is not used. Do not change this value by any means.
PC09 MOD1 Analog monitor 1 output
PC10 MOD2 Analog monitor 2 output
PC11 MO1 Analog monitor 1 offset
PC12 MO2 Analog monitor 2 offset
PC13 This parameter is not used. Do not change this value by any means.
PC14
PC15 SNO Station number selection
PC16 This parameter is not used. Do not change this value by any means.
PC17 **COP4 Function selection C-4
PC18 This parameter is not used. Do not change this value by any means.
PC19
PC20
PC21 *BPS Alarm history clear
PC22 This parameter is not used. Do not change this value by any means.
PC23
PC24
PC25
PC26
PC27 **COP9 Function selection C-9
PC28 This parameter is not used. Do not change this value by any means.
PC29
PC30
PC31
PC32
Note 1. Each: Set parameters for each axis of A and B.
Common: Set parameters for common axis of A and B. Be sure to set the same value to the both axes. When the setting values are
different, the value set at last will be enabled.
2. The values are common in A-axis and B-axis.
)
POINT
The parameter whose symbol is preceded by * is enabled with the following
conditions:
* : After setting the parameter, cycle the power or reset the controller.
**: After setting the parameter, cycle the power.
Name
14 - 34
Each/ Default
common value Unit
(Note 1) (Note 2)
Each 0 rev
Each 0 ms
Each 0010h
Each 0000h
Each 0000h
Each 0000h
Each 50 r/min
0
Common 0000h
Common 0001h
Common 0 mV
Common 0 mV
0
0
Common 0
0000h
Each 0000h
0000h
0000h
0000h
Each 0000h
0000h
0000h
0000h
0000h
0000h
Each 0000h
0000h
0000h
0000h
0000h
0000h
Reference
Section
5.3.2
Section
5.3.2
Section
5.3.2
Section
5.3.2
Section
5.3.2
Section
5.3.2