Mitsubishi Electric MELSERVO-J3W Series Instruction Manual page 483

APPENDIX
App. 3 COMPLIANCE WITH CE MARKING
App. 3.1 What is CE marking?
The CE marking is mandatory and must be affixed to specific products placed on the European Union. When a
product conforms to the requirements, the CE marking must be affixed to the product. The CE marking also
applies to machines and equipment incorporating servos.
(1) EMC directive
The EMC directive applies to the servo units alone. This servo is designed to comply with the EMC
directive. The EMC directive also applies the servo-incorporated machines and equipment. This requires
the EMC filters to be used with the servo-incorporated machines and equipment to comply with the EMC
directive. For specific EMC directive conforming methods, refer to the EMC Installation Guidelines
(IB(NA)67310).
(2) Low voltage directive
The low voltage directive applies also to servo units alone. This servo is designed to comply with the low
voltage directive.
App. 3.2 For compliance
Be sure to perform an appearance inspection of every unit before installation. In addition, have a final
performance inspection on the entire machine/system, and keep the inspection record.
(1) Servo amplifiers and servo motors used
Use the servo amplifiers and servo motors which standard product.
Servo amplifier
Servo motor series : HG-AK
(2) Structure
(a) MR-J3W-0303BN6
: MR-J3W-0303BN6 MR-J3W- B
HF-MP
for control circuit
HF-KP HF-SP
Control box
Reinforced
insulating type
24VDC
power supply
Reinforced
insulating type
Circuit
protector
48VDC/24VDC
power supply
for main circuit
App. - 6
HC-UP HC-LP
Circuit
protector
Servo
Relay
amplifier
HG-JP
Servo motor
M
M