Assembling A Battery Unit; Required Items; Disassembly And Assembly Of The Battery Case Mr-Btcase - Mitsubishi Electric MELSERVO-J3W Series Instruction Manual

12. ABSOLUTE POSITION DETECTION SYSTEM

12.3 Assembling a battery unit

CAUTION

12.3.1 Required items

12.3.2 Disassembly and assembly of the battery case MR-BTCASE

(1) Disassembly of the case
MR-BTCASE is shipped assembled. To install MR-BATs, the case needs to be disassembled.
Screw
Do not have new and old batteries installed together.
When replacing batteries, replace all batteries by new batteries.
POINT
Always install eight MR-BAT batteries to an MR-BTCASE battery case.
Product
Battery case
Battery
Remove the two screws using a
Phillips screwdriver.
Cover
Remove the cover.
Model Use
MR-BTCASE is a case that holds eight MR-BAT
MR-BTCASE 1
batteries and connect them to the connector.
MR-BAT 8 Lithium battery (primary battery, nominal 3.6V)
CON1
CON2
CON3
CON4
CON5
CON6
CON7
CON8
12 - 5
Remarks
Parts name
Holder 1 Holder 2
Holder 3 Holder 4
Holder 5 Holder 6
Holder 7 Holder 8