Cli\System\Snmp\User Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

Configuration / project engineering
5.7 Configuration with the Command Line Interface
edit <Index>
[NOAUTH|AUTH|PRIV]
[RE|RD|WE|WD]
delete <Index>
clearall
See also
SNMP Config menu command (Page 103)
5.7.2.9

CLI\SYSTEM\SNMP\USER menu command

Managing SNMP users
With the commands in this menu, you manage SNMP users (creating, deleting etc.).
CLI\SYSTEM\SNMP\USER>
Command
add <user name> <group
name> [NONE|MD5|SHA]
[authentication pw]
[encryption pw]
182
Write and read access can also be
set for the group:
R Read access
W Write access
Changes the security level of the
group and sets the access rights.
You can display the index of the
group with the "info" command.
RE Enables read access
RD Disables read access
WE Enables write access
WD Disables write access
Deletes the SNMPv3 group from the
group list at the index position.
Clears all SNMP groups that are
empty.
Description
Assigns an SNMPv3 user
to a group.
If authentication is
necessary for the group,
the algorithm must be
specified as a parameter
(MD5 or SHA).
If encryption is necessary
for the group, the
encryption password must
be specified as a
parameter.
Comment
You cannot edit the authentication and encryption
settings unless the group is empty.
Preventing read access also prevents write access.
Permitting write access also permits read access.
ᅳ ✔ ✔
Is only possible to delete a group if it is empty.
ᅳ ✔ ✔
ᅳ ✔ ✔
Comment
IWLAN/ W744 W746
PB LINK
The authentication password and the encryption
password can be a maximum of 63 characters long.
ᅳ ✔ ✔
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
W747 W78x W78x
RR
✔ ✔ ✔
SCALANCE W786-xPRO