Learning Table Menu Command; Arp Table Menu Command; Spanning Tree Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.5.3

Learning Table Menu Command

A ssignmen t of M AC Address
The learning table contains the information about whether a MAC address can be
reached over the wired Ethernet interface or over the
SCALANCE W78x obtains this information from the active data exchange. The
learning table also contains information on clients and on up to 8 devices
connected downstream from it operating in
6.5.4 AR P Table Menu Command
Assignment of MAC Address and IP Ad
The ARP protocol (
address of a known IP add
the interfac
how the information wa
operation o
6 .5.5 Spanning T
Note
The Spanning Tree me
SCALANCE
System men
A voiding Loops on R
The spann
are severa
formed in the network by all
(r edundant) ports for data traffic. If there is an interruption, the data can be sent
o ver an alternative path. The functionality of the spanning tree algorithm is based
on the exchange of configuration and topology change frames.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
and Port
Address Resolution Protocol) obtains the corresponding MAC
ress. The page of this menu command also indicates
e over which an addres
s obtained (for example dyn
r static if it w as configured).
ree Menu Command
nu command is available only when you u
W78x in th e access point mode. You can s
u.
edundant Connections
ing tree algo rithm allows network structures to
l connection s between two stations. Spanning
owing only one path and d
wireless interfaces. The
the layer 2 tunneling mode.
dress
s can be rea ched. The last colu
amic if it was obtained during
pe
eactivating the other
mn indicat es
se the
cify the mode in the
b created in which there e
tree prevents loops being
192