Identifying The Location Of The Cisco Wideband Sip And Cisco Wideband Spa - Cisco uBR10012 Hardware Installation Manual

Identifying the Location of the Cisco Wideband SIP and Cisco Wideband SPA

Table 10: Cisco Wideband SIP LED
LED Label
FAIL
Identifying the Location of the Cisco Wideband SIP and Cisco Wideband SPA
This section describes how to specify the physical locations of the Cisco Wideband SIP and Cisco Wideband
SPA on the Cisco uBR10012 router within the Cisco IOS command-line interface (CLI) to configure or
monitor those devices.
To see slot numbering used in Cisco uBR10012 router, see
Hardware Installation
Specifying the Location for the Cisco Wideband SIP
In Cisco IOS commands, the Cisco Wideband SIP is designated by its location on a Cisco uBR10012 router.
The location is specified in the form:
• slot/subslot (for Cisco IOS Releases 12.2(33)SCA and 12.3BC)
• slot or slot/subslot (for Cisco IOS Release 12.2(33)SCB and later)
On the Cisco uBR10012 router, the Cisco Wideband SIP occupies two adjacent full-height line card slots:
either slots 1/0 and 2/0, or slots 3/0 and 4/0. On the Cisco IOS CLI, the location of the Cisco Wideband SIP
is specified as follows:
• If the Cisco Wideband SIP occupies slots 1/0 and 2/0, the location for the Cisco IOS CLI is specified
• If the Cisco Wideband SIP occupies slots 3/0 and 4/0, the location for the Cisco IOS CLI is specified
Note If the Cisco Wideband SIP is moved from slots 1/0 and 2/0 to slots 3/0 and 4/0, the OIR is unsuccessful.
To prevent this failure, the card commands for the Cisco Wideband SIP in slot/subslot 1/0 and
Cisco Wideband SPAs in slot/subslot 1/0 must be removed.
If the Cisco Wideband SIP is moved from slots 3/0 and 4/0 to slots 1/0 and 2/0, the OIR is unsuccessful.
To prevent this failure, the card commands for Cisco Wideband SIP in slot/subslot 3/0 and Cisco Wideband
SPAs in slot/subslot 3/0 must be removed.
For information about card commands, see
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
12
Color
Amber
Off
Guide.
as slot/subslot 1/0.
as slot/subslot 3/0.
State Meaning
On The SIP has encountered an error, or the SIP software
functionality is being verified.
Off The SIP is powered on, verified for basic
functionality, and operating normally.
Cisco uBR10012 Universal Broadband Router
Optional Configuration
Overview of SPA Interface Processors
Tasks.