Data Logging File Transfer (Auto Transfer To Ftp Server) - Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual

11.8
Data Logging File Transfer (Auto Transfer to FTP
Server)
RnPCPU
RnCPU RnENCPU
(Process)
• This function cannot be used in the R00CPU.
This function automatically transfers data logging files to the FTP server.
An SD memory card as the temporary storage destination is not required by setting the CPU built-in memory (function
*1
memory ) as the data storage destination while using this function.
CPU module
LOG01_
00000001
.txt
Data logging
file
*1 For the CPU modules that can use the function memory, refer to the availability of storage location. ( Page 183 Availability)
Before executing the function, check the versions of the CPU module and CPU Module Logging Configuration
Tool used. ( Page 1008 Added and Enhanced Functions)
An FTP server is required for the data logging file transfer function. For details on the server, refer to the
manual for the server used.
The operation of this function is checked with the following FTP server.
Item
FTP server whose operation is checked by Mitsubishi
11 DATA LOGGING FUNCTION
194

11.8 Data Logging File Transfer (Auto Transfer to FTP Server)

RnPCPU RnPSFCPU RnPSFCPU RnSFCPU RnSFCPU
(Redundant) (Standard) (Safety) (Standard)
FTP server
Ethernet
CPU module
LOG02_
00000001
.txt
Data logging
file
(Safety)
LOG01_ LOG02_ LOG03_
00000001 00000001 00000001
.txt .txt .txt
Supported operating system

Microsoft Internet Infomation Services(IIS)
The supported operating systems are as follows:
 
• Microsoft Windows 10
 
• Microsoft Windows 8.1
 
• Microsoft Windows 8
 
• Microsoft Windows 7
CPU module
LOG03_
00000001
.txt
Data logging
file