Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 975

■Trigger
The following window specifies the trigger condition when the trigger logging is selected ( Page 179 Trigger Condition)
Window
Displayed items
Item
Condition Device change
*1
specification specification
Label change
*2
specification
Step No.
specification
When trigger instruction executed
*1 This item is displayed when "Device" is specified as "Logging target" in the "Logging type" window.
*2 This item is displayed when "Label" is specified as "Logging target" in the "Logging type" window.
*3 The default of "Device change specification" or "Label change specification" when "Condition specification" is selected is shown.
Description
Configure the trigger condition based on the device data
condition.
Configure the trigger condition based on the label data
condition.
Configure the trigger condition based on the step No.
Trigger condition is established when the LOGTRG
instruction is executed.
Appendix 13 How to Use CPU Module Logging Configuration Tool
Setting range
Page 179 Device/label change
specification
Page 177 Step No. specification

A
Default
*3
Checked
*3
Not checked


APPX
973