Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 919

When the file format is binary file
■When a global device or global label is specified
The following table lists the collection intervals at which data can be collected under the following conditions.
• Scan time = 1.5ms (up to 3ms)
• Internal buffer capacity setting = 128K bytes per setting (default setting)
• Collection setting = Time specification (data collection at time interval)
• Data setting = Data register (D) (Data-type: word-signed (decimal number type))
• Output setting = Day/time column (output format is default) and index column are outputted.
• Save setting = file switching timing: 1024K bytes (when the data storage destination memory is the function memory) or
10000 records (when the data storage destination memory is the SD memory card), operation when the number of saved
files exceeded: overwriting
• When the data storage destination memory is the SD memory card, functions that require access to files in the SD memory
card except for the data logging function are not active.
• The default setting value is used for the file transfer server setting of the CPU Module Logging Configuration Tool (however,
the IP address, login user name, and password can be customized).
• Parameters are used only for required settings that can be connected to the FTP server (IP address settings of the module
parameter only) and default setting values are used for other settings.
*1 3ms (to 4.5ms) for the Process CPU (redundant mode)
Number of points File transfer
(8 points  1
8 Not performed
points setting)
Performed
(16 points  1
16 Not performed
points setting)
Performed
(64 points  1
64 Not performed
points setting)
Performed
*1
Collection interval at which data can be collected
When the When the SD memory card is used
function
NZ1MEM-2GBSD
memory is
Programmable
used
controller CPU

1.0ms

No file deletion 1.0ms
specification at
transfer
completion
File deletion 1.0ms 1.0ms
specification at
transfer
completion

1.0ms

No file deletion 1.0ms
specification at
transfer
completion
File deletion 1.0ms 1.0ms
specification at
transfer
completion

1.0ms

No file deletion 1.0ms
specification at
transfer
completion
File deletion 1.0ms 1.0ms
specification at
transfer
completion
NZ1MEM-4/8/16GBSD
Process CPU, Programmable
Safety CPU controller CPU
1.0ms 1.0ms

1.0ms

1.0ms
1.0ms 1.0ms

1.0ms

1.0ms
2.0ms 1.0ms

1.0ms

2.0ms
(For the
R04(EN)CPU:
1.0ms)
Appendix 9 Processing Time
Process CPU,
Safety CPU
1.0ms

A

2.0ms


5.0ms


APPX
917