Configuration Procedure; Label Communication Data Storage Location And Operation At The Time Of Each Setting Operation; File Operation - Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual

Configuration procedure

This section describes the configuration procedure to enable access by specifying the global label from external devices.
Operating procedure
"Global Label Setting" window
"Setting of File/Data Use or Not in Memory Card windows
Data storage to the data memory, not using the SD memory card, does not need the setting of procedure 3.
Label communication data storage location and operation at the
time of each setting operation
This section describes the storage location for label communication data and the accessibility according to the setting of
whether to use the file/data in a memory card.
: Access from external device possible (Communication memory indicated in parentheses) : Access from external device
not possible (Generates communication error)
Label communication data storage
location
Data Memory
SD memory card
Data memory and SD memory card
*1 An error occurs in the CPU module.

File operation

The label communication data can be written from an engineering tool. Reading and deleting
*1 Deleting an entire folder is possible.
22 LABELS
384
22.7 Label Access Setting from External Device
When "Enable" is set in the setting for the
usage status of the file/data in a memory
card
*1

 (SD memory card)
 (SD memory card)
1.
Set the label in "Global Label
Setting" and select the "Access from
External Device" checkbox.
2.
Check the capacity of the label
communication data.
3.
Enable "Data for Label
Communication" to use the label
communication data stored in the
SD memory card (or store the label
communication data in the SD
memory card).
[Memory Card Parameters] 
[Setting of File/Data Use or Not in
Memory Card]  [Data for Label
Communication]
4.
Write parameters, global label
setting, and global label assignment
information files to the CPU module.
When "Disable" is set in the setting for the
usage status of the file/data in a memory
card
 (Data memory)

 (Data memory)
*1
are not possible.