Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 296

■Program example
• Devices to be used for programs to start operation processing synchronously
Device to be used
M0
M1
U3En\G2048
D2 to D9
M2 to M9
• Example of a program to synchronize the start of operation processing
16 MULTIPLE CPU SYSTEM FUNCTION
294
16.2 Operation Settings
Application
Flag that indicates the operation processing is ready to be started (after a flag that indicates the operation start turns on, this
flag turns off.)
Flag that indicates an operation start (this flag turns on for only one scan.)
The synchronization counter of each CPU module (n=0: CPU No.1, n=1: CPU No.2, n=2: CPU No.3, n=3: CPU No.4)
The storage location for values of the synchronization counter of each CPU module
The operation processing start wait state of each CPU module