Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 951

Item
Operation settings when entering into RUN mode
Data logging file transfer function
SD memory card replacement
*1 When the storage destination of the data logging files is the function memory, up to 2 data loggings can be executed simultaneously
even though 10 data loggings can be set.
*2 If the data logging file transfer function is not set, the files are stored in the data memory.
Folder configuration
The following figure shows the folder configuration of the SD memory card attaching to a CPU module.
/ $MELPRJ$
*1 *2
LOGGING
*1 *2
*1 Folder names cannot be modified.
*2 Do not create folders/files under the $MELPRJ$ and LOGGING folders using a personal computer and other devices.
*3 To remove unnecessary folders, use the following methods:
 Use a personal computer.
 Logging file operation (Page 990 Logging file operation).
Specifications
This function sets data logging operations when entering into RUN mode
after the data logging setting is registered.
This function automatically transfers data logging files to the FTP server.
SD memory cards can be replaced using the SD memory card forced
disable function even when the data logging is in progress.
LOG01 Stack file (setting No.1)
*3
LOG01.BIN
00000001
*3
00000101
LOG02
Stack file (setting No.2)
LOG02.BIN
LOG03
Stack file (setting No.3)
LOG03.BIN
Appendix 13 How to Use CPU Module Logging Configuration Tool
00000001.BIN
00000002.BIN
A
APPX
949