10.2
Device test with execution conditions
RnPCPU
RnPCPU
RnCPU RnENCPU
(Process)
(Redundant)
Using the engineering tool, device/label values can be set for each execution of specified steps of programs.
This function enables to debug a specific ladder block without modifying the program even when the program is configured as
shown in the example below.
(1)
Engineering tool
(1) The device is operated in accordance with the registered settings. (M0 of the step number 10 is on.)
Before using the device test with execution conditions, check the version of the CPU module and the
engineering tool used. (Page 1008 Added and Enhanced Functions)
RnPSFCPU RnPSFCPU RnSFCPU RnSFCPU
(Standard)
(Safety)
(Standard)
(Safety)
Registration
Registration
• Program
: MAIN
• Step number
: 10
• Device
: M0
• State
: ON
10 TEST FUNCTION
10.2 Device test with execution conditions
10
157