Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 917

■When a local device or local label is specified
The following table lists the collection intervals at which data can be collected under the following conditions.
• Scan time = 1.5ms (up to 5ms)
• Internal buffer capacity setting = 128K bytes per setting (default setting)
• Collection setting = Time specification (data collection at time interval)
• Data setting = Data register (#D) (Data-type: word-signed (decimal number type))
• Output setting = Day/time column (output format is default) and index column are outputted.
• Save setting = file switching timing: 1024K bytes (when the data storage destination memory is the function memory) or
10000 records (when the data storage destination memory is the SD memory card), operation when the number of saved
files exceeded: overwriting
• When the data storage destination memory is the SD memory card, functions that require access to files in the SD memory
card except for the data logging function are not active.
• The default setting value is used for the file transfer server setting of the CPU Module Logging Configuration Tool (however,
the IP address, login user name, and password can be customized).
• Parameters are used only for required settings that can be connected to the FTP server (IP address settings of the module
parameter only) and default setting values are used for other settings.
Number of points File transfer
8 (8 points  1 Not performed
points setting)
Performed
(16 points  1
16 Not performed
points setting)
Performed
64 (64 points  1 Not performed
points setting)
Performed
(128 points  1
128 Not performed
points setting)
Performed
256 (128 points  2 Not performed
points setting)
Performed
Collection interval at which data can be collected
When the
function
memory is used


No file deletion
specification at transfer
completion
File deletion 1.0ms
specification at transfer
completion

No file deletion 
specification at transfer
completion
File deletion 1.0ms
specification at transfer
completion


No file deletion
specification at transfer
completion
File deletion 1.0ms
specification at transfer
completion

No file deletion 
specification at transfer
completion
File deletion 1.0ms
specification at transfer
completion


No file deletion
specification at transfer
completion
File deletion 1.0ms
specification at transfer
completion
When the SD memory card is used
NZ1MEM-2GBSD NZ1MEM-4/8/16GBSD
1.0ms 1.0ms
1.0ms 1.0ms
1.0ms 1.0ms
1.0ms 1.0ms
1.0ms 1.0ms
1.0ms 1.0ms
1.0ms 2.0ms
1.0ms 3.0ms
1.0ms 3.0ms
3.0ms 5.0ms
4.0ms 6.0ms
4.0ms 6.0ms
6.0ms 6.0ms
7.0ms 7.0ms
7.0ms 7.0ms
Appendix 9 Processing Time
A
APPX
915