Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 883

No. Name
SD1890 Current safety cycle
processing time
SD1891
SD1892 Minimum safety cycle
processing time
SD1893
SD1894 Maximum safety
cycle processing time
SD1895
SD1903 Total standard/safety
shared label usage
capacity
SD1904 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (1st module)
SD1905 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (2nd module)
SD1906 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (3rd module)
SD1907 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (4th module)
SD1908 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (5th module)
SD1909 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (6th module)
SD1910 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (7th module)
SD1911 Start I/O number of
the CC-Link IE Field
Network safety
communication target
station (8th module)
Data stored Details
Current safety cycle • The current safety cycle processing time is stored. (The time is
processing time (unit: measured in microseconds (s).)
ms) SD1890: The ms part is stored. (Range: 0 to 65535)
SD1891: The s part is stored. (Range: 0 to 999)
Current safety cycle
• The measurement is stored even when the status is STOP.
processing time (unit:
s)
Minimum safety cycle • The minimum safety cycle processing time is stored. (The time is
processing time (unit: measured in microseconds (s).)
ms) SD1892: The ms part is stored. (Range: 0 to 65535)
SD1893: The s part is stored. (Range: 0 to 999)
Minimum safety cycle
• The measurement is stored even when the status is STOP.
processing time (unit:
s)
Maximum safety • The maximum safety cycle processing time is stored. (The time
cycle processing time is measured in microseconds (s).)
(unit: ms) SD1894: The ms part is stored. (Range: 0 to 65535)
SD1895: The s part is stored. (Range: 0 to 999)
Maximum safety
• The measurement is stored even when the status is STOP.
cycle processing time
(unit: s)
Total standard/safety The total usage capacity for labels defined in the standard/safety
shared label usage shared label setting file is stored in 4-word units.
capacity (unit: words)
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
0 to FFH: Start I/O • The value obtained by dividing the start I/O number of the station
number targeted for CC-Link IE Field Network safety communications by
FFFFH: Not set 16 is stored.
• When the safety communication function is not used, FFFFH is
stored.
Set by
(setting
timing)
S (Status
change)
S (Status
change)
S (Status
change)
S (Status
change)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
Appendix 5 List of Special Register Areas
CPU
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
A
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
RnPSF
RnSF
APPX
881