Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 970

Item
Condition Device specification
specification
Label specification
Step No. specification
*1 This item is displayed when "Device" is specified as "Logging target" in the "Logging type" window.
*2 This item is displayed when "Label" is specified as "Logging target" in the "Logging type" window.
*3 The default of "Device specification" or "Label specification" when "Condition specification" is selected is shown.
APPX
968
Appendix 13 How to Use CPU Module Logging Configuration Tool
Description
*1
Specify this item for collecting data at the END
processing where the specified device condition
has been satisfied. If both the step No. and
device are specified as conditions, the data is
collected when the both conditions are satisfied.
*2
Specify this item for collecting data at the END
processing where the specified label condition
has been satisfied. If both the step No. and label
are specified as conditions, the data is collected
when the both conditions are satisfied.
Specify this item for collecting data when the
condition is satisfied immediately before
execution of the specified step No.
Setting range
Page 175 Device/label
specification
Page 177 Step No. specification
Default
*3
Checked
*3
Not checked
