Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 417

■CPU parameter (redundant settings)
Set the CPU parameter in "Redundant System Settings" as follows.
(1) Set "Not Set" in "Other system Start-up Timeout Setting".
(2) Set "Enable" in "Control System Start-up Setting (Input (X))".
(3) Set "X20" in "Input (X)".
(4) Set "Detailed setting" in "Tracking Device/Label Setting".
Set "Device/Label Detailed Setting" in "Global Device Setting" as follows.
(5) Do not include X20 to X2F and Y30 to Y3F, which are used in the program example, in the tracking transfer range.
To switch enabling and disabling "Control System Start-up Setting (Input (X))", set a switch for the input to X20
so that "Control System Start-up Setting (Input (X))" is enabled only when the switch is on.
26.7 Determination of Control System/Standby System
(1)
(2)
(3)
(4)
(5)
26 BASIC CONCEPT
415
26