Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 165

■Disabling device test with execution conditions
In addition to the operation of the engineering tool, the following operations can be used to disable the device test with
execution conditions.
• Powering off and on
• Reset operation
• Writing a program to the CPU built-in memory by writing data to the programmable controller while the CPU module is in
the STOP state
• Deleting a program in the CPU built-in memory while the CPU module is in the STOP state
• Initializing the CPU built-in memory while the CPU module is in the STOP state
• Changing a program in the CPU built-in memory using the following SLMP commands while the CPU module is in the
STOP state
• Deleting a file (Delete File) (1822)
• Copying a file (Copy File) (1824)
• Changing a program in the CPU built-in memory using the following FTP commands while the CPU module is in the STOP
state
• Deleting a file (delete, mdelete)
• Changing a file name (rename)
• Restoring a program using the CPU module data backup/restoration function
• Changing a program online (the online change (ladder block) or the file batch online change) (Page 165 Operation
during online change)
• Adding/deleting/editing global labels in the CPU built-in memory by writing data to the programmable controller while the
CPU module is in the STOP state
• Writing CPU parameters to the CPU built-in memory by writing data to the programmable controller while the CPU module
*1*3
is in the STOP state
*1 After the operation is performed, the device test with execution conditions registered to the program to be changed is disabled when the
operating status of the CPU module is changed from STOP to RUN. (It is not disabled upon completion of the operation.)
*2 When global labels are added, deleted, or changed, all the registrations that specify global labels are disabled.
*3 When the CPU parameters are changed, all the registrations that specify local labels are disabled.
*4 When the same programs, global labels, or CPU parameters are written, the registrations are not disabled.
*1*2*4
*1
10 TEST FUNCTION
10.2 Device test with execution conditions
10
163