Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 798

Event Event Event
code type category
24000 Operation Info
24001
24100
24101
24102
24200
24201
24202
24300
24301
25000
APPX
796
Appendix 2 Event List
Detected event Description
Clock setting The clock data was set.
Remote operation A remote request (RUN, STOP, or
request accepted PAUSE) was accepted.
Operating status The operating status of the CPU module
change (RUN) was changed to RUN.
Operating status The operating status of the CPU module
change (STOP) was changed to STOP.
Operating status The operating status of the CPU module
change (PAUSE) was changed to PAUSE.
Creation of new • A new folder was created.
folders, writes to • A new file was created or data was
*1
files/folders written to a file.
*1
File copy A file was copied.
*1
Folder/file rename A folder name or file name was changed.
Safety operation The safety operation mode was changed
mode change to SAFETY MODE (wait-for-restart).
(SAFETY MODE
(wait-for-restart))
Module A module communication test was
communication test executed.
Safety operation The safety operation mode was changed
mode change to TEST MODE.
(TEST MODE)
Online module The online module change processing
change completed.
Detailed information
Detailed Detailed
information 1 information 2
Operation Clock
source information
information (before change)
Remote
operation type
information
 
Operation Drive/file
source information
information
Copy source
drive/file
information

System
configuration
information
Detailed
information 3
Clock
information
(after change)

Copy
destination
drive/file
information
