Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual page 965

■Reading the logging setting from SD memory card
The following procedure is to read the data logging setting written in an SD memory card attached to the personal computer.
Operating procedure
1.
Attach an SD memory card to the personal computer.
2.
Open the following window.
[Project]  [Read Logging Setting from Memory Card (SD)]
3.
Select the drive from which data is read and data to be read.
4.
Click the [Read] button.
Window
Displayed items
Item
Drive to read from
Target logging setting data
• Any existing data (data logging setting with the same setting number or common setting) on the target is
overwritten.
• The PLC series of the setting data in the SD memory card must be "RCPU".
Description
Select the drive where the data to be read is stored.
Select the data item to be read.
Appendix 13 How to Use CPU Module Logging Configuration Tool
A
APPX
963