Dns Resolver Static Name Server Settings; Dns Resolver Dynamic Name Server Table; Dns Resolver Static Host Name Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

DNS Resolver Static Name Server Settings

The window is used to create the DNS Resolver name server of the Switch.
To view the following window, click Network Application > DNS Resolver > DNS Resolver Static Name Server Settings:
The following parameter may be configured:
Parameter
Server IP Address
Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specific entry.

DNS Resolver Dynamic Name Server Table

This window displays the current DNS Resolver name servers.
To view the following window, click Network Application > DNS Resolver > DNS Resolver Dynamic Name Server Table:

DNS Resolver Static Host Name Settings

The window is used to create the static host name entry of the switch.
To view the following window, click Network Application > DNS Resolver > DNS Resolver Static Host Name Settings:
The following parameter may be configured:
Parameter
Host Name
IP Address
Figure 8 - 17. DNS Resolver Static Name Server Settings window
Description
Enter a DNS Resolver name server. Tick the Primary check box to set the name server as a
primary name server.
Figure 8 - 18. DNS Resolver Dynamic Name Server Table window
Figure 8 - 19. DNS Resolver Static Host Name Settings window
Description
Enter the name of the host.
Enter the IP address of the host.
241