Diffserv Class Commands; Class-Map - D-Link DWL-8500AP Command Reference Manual

Format
Mode
no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ
configuration is retained and can be changed, but it is not activated. When enabled, Diffserv
services are activated.
Format
Mode

DiffServ Class Commands

Use the DiffServ class commands to define traffic classification. To classify traffic, you
specify Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes of traffic
(name, match criteria)
This set of commands consists of class creation/deletion and matching, with the class match
commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria
are also known as class rules, with a class definition consisting of one or more rules to identify
the traffic that belongs to the class.
Once you create a class match criterion for a class, you cannot change or
NOTE:
delete the criterion. To change or delete a class match criterion, you must
delete and re-create the entire class.
The CLI command root is

class-map

This command defines a DiffServ class of type match-all. When used without any match
condition, this command enters the class-map mode. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing DiffServ
class.
The class-map-name 'default' is reserved and must not be used.
NOTE:
The class type of
a packet to be considered a member of the class.
The CLI mode is changed to Class-Map Config when this command is suc-
NOTE:
cessfully executed.
Format
Mode
no class-map
This command eliminates an existing DiffServ class. The
an existing DiffServ class (The class name 'default' is reserved and is not allowed here). This
diffserv
Global Config
no diffserv
Global Config
.
class-map
indicates all of the individual match conditions must be true for
match-all
class-map match-all <class-map-name>
Global Config
5 Quality of Service (QoS) Commands
is a case
<class-map-name>
is the name of
<class-map-name>
DiffServ Class Commands 233