Dscp Cos Mapping; Class Map - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

DSCP CoS Mapping

This window is used to display and configure the DSCP CoS mapping settings.
To view the following window, click QoS > Advanced Settings > DSCP CoS Mapping, as shown below:
The fields that can be configured are described below:
Parameter
From Port - To Port
CoS
DSCP List
Click the Apply button to accept the changes made.

Class Map

This window is used to display and configure the class map settings.
To view the following window, click QoS > Advanced Settings > Class Map, as shown below:
Figure 7-9 DSCP CoS Mapping Window
Description
Select the range of ports that will be used for this configuration here.
Select the CoS value to map to the DSCP list. Options to choose from are 0 to 7.
Enter the DSCP list value to map to the CoS value here. This value must be
between 0 and 63.
Figure 7-10 Class Map Window
145