Switch Information; Advanced Settings - D-Link DES-3350SR User Manual

Switch Information

Click the Switch Information link in the Configuration menu.
This window shows which (if any) external modules are installed, and the switch's MAC Address (assigned by the factory and
unchangeable). In addition, the Boot PROM Version and Firmware Version numbers are shown. This information is helpful to
keep track of PROM and firmware updates and to obtain the switch's MAC address for entry into another network device's address
table – if necessary.
You can also enter the name of the System, its location, and the name and telephone number of the System Administrator. It is
recommended that the person responsible for the maintenance of the network system that this switch is installed on be listed here.

Advanced Settings

Click Advanced Settings on the Configuration menu:
The following fields can be set:
Parameter
D-Link DES-3350SR Standalone Layer 3 Switch
Figure 7 - 2. Switch Information (Basic Settings) window
Figure 7 - 3. Switch Information (Advanced Settings) window
Serial-port auto logout
time
"System" to be enabled or disabled.
Description
The Auto Logout field may be set to Never, 2
minutes, 5 minutes, 10 minutes, and 15
minutes, depending on the time the user wishes
the Switch to be idle before automatically
22